Owner's Manual
Table Of Contents
- Table of Contents
- Introduction
- Instrument Cluster
- Entertainment Systems
- AUDIO SYSTEMS
- GENERAL AUDIO INFORMATION
- NAVIGATION SYSTEM (IF EQUIPPED)
- SYNC SYSTEM (LATE AVAILABILITY — IF EQUIPPED)
- Climate Controls
- Lights
- Driver Controls
- MULTI-FUNCTION LEVER
- TILT/TELESCOPE STEERING WHEEL
- ILLUMINATED VISOR MIRROR (IF EQUIPPED)
- OVERHEAD CONSOLE
- CENTER CONSOLE
- CLOCK
- INSTRUMENT PANEL STORAGE COMPARTMENT
- AUXILIARY POWER POINT (12VDC)
- POWER WINDOWS
- INTERIOR MIRROR
- EXTERIOR MIRRORS
- SPEED CONTROL
- STEERING WHEEL CONTROLS (IF EQUIPPED)
- MOON ROOF (IF EQUIPPED)
- MESSAGE CENTER
- Selectable features
- Reset
- Info menu
- Odometer/Trip odometer
- Distance to empty (DTE)
- Average fuel economy (AFE)
- Average Speed
- Trip elapsed drive time
- Compass display (if equipped)
- Compass zone/calibration adjustment
- Setup menu
- System check
- Units (English/Metric)
- Language
- Easy entry/exit (if equipped)
- Reverse Sensing System (Park assist) (if equipped)
- System warnings
- Selectable features
- INTERIOR TRUNK CONTROL
- Locks and Security
- KEYS
- POWER DOOR LOCKS
- CHILDPROOF DOOR LOCKS
- INTERIOR LUGGAGE COMPARTMENT RELEASE
- REMOTE ENTRY SYSTEM
- KEYLESS ENTRY SYSTEM (IF EQUIPPED)
- SECURILOCK™ PASSIVE ANTI-THEFT SYSTEM
- PERIMETER ALARM SYSTEM
- Seating and Safety Restraints
- SEATING
- REAR SEATS
- SAFETY RESTRAINTS
- Personal Safety System™
- How does the Personal Safety System™ work?
- Driver and passenger dual-stage airbag supplemental restraints
- Front crash severity sensor
- Driver’s seat position sensor
- Front passenger sensing system
- Front safety belt usage sensors
- Front safety belt pretensioners
- Front safety belt energy management retractors
- Determining if the Personal Safety System™ is operational
- Safety belt precautions
- Combination lap and shoulder belts
- Energy Management Feature — Front Outboard
- Vehicle sensitive mode
- Automatic locking mode
- Safety belt pretensioner
- Safety belt height adjustment
- Safety belt extension assembly
- Safety belt maintenance
- Safety belt warning light and indicator chime
- Conditions of operation
- Belt-Minder
- Personal Safety System™
- AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
- Important supplemental restraint system precautions
- Children and airbags
- How does the safety belt pretensioner and airbag supplemental restraint system work?
- Front passenger sensing system
- Determining if the system is operational
- Seat-mounted side airbag system
- Side curtain airbag system
- Disposal of airbags and airbag equipped vehicles (including pretensioners)
- SAFETY RESTRAINTS FOR CHILDREN
- SAFETY SEATS FOR CHILDREN
- Tires, Wheels and Loading
- Driving
- Roadside Emergencies
- Customer Assistance
- GETTING THE SERVICES YOU NEED
- IN CALIFORNIA (U.S. ONLY)
- THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY)
- UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY)
- FORD EXTENDED SERVICE PLAN
- GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA
- ORDERING ADDITIONAL OWNER’S LITERATURE
- REPORTING SAFETY DEFECTS (U.S. ONLY)
- REPORTING SAFETY DEFECTS (CANADA ONLY)
- Cleaning
- Maintenance and Specifications
- SERVICE RECOMMENDATIONS
- PRECAUTIONS WHEN SERVICING YOUR VEHICLE
- OPENING THE HOOD
- IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
- WINDSHIELD WASHER FLUID
- CHANGING THE WIPER BLADES
- ENGINE OIL
- BATTERY
- ENGINE COOLANT
- FUEL FILTER
- WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS
- ESSENTIALS OF GOOD FUEL ECONOMY
- EMISSION CONTROL SYSTEM
- POWER STEERING FLUID
- BRAKE/CLUTCH FLUID
- TRANSAXLE FLUID
- AIR FILTER
- MOTORCRAFT PART NUMBERS
- MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
- ENGINE DATA
- IDENTIFYING YOUR VEHICLE
- TRANSMISSION/TRANSAXLE CODE DESIGNATIONS
- Accessories
- Index
Replacing front side marker bulbs
1. Make sure the headlamp control
is in the OFF position.
2. Pry the lamp away from the
vehicle at the rear of lamp at the
wheel opening. (Rotate lamp from
the wheel opening away from the
vehicle), as the lamp separates from
the vehicle, slide the lamp towards
the wheel opening to disengage
lamp.
3. Rotate the lamp clockwise while
holding the electrical connector in
place with your other hand. After
rotating the lamp 90 degrees
clockwise, pull and disengage the
wire harness and bulb from the
lamp.
4. With the bulb exposed, carefully remove the bulb from the socket by
grasping the bulb and pulling it away from the wire harness.
Replace with a new bulb, and reverse the removal steps to complete the
process.
Replacing stop/tail/turn/and side marker bulbs
Your vehicle is equipped with a rear lamp that has a stop/tail/turn/and
side marker lamp module containing integral multiple light emitting
diodes (LED). If one or more LEDs burn out, the complete lamp module
has to be replaced. See your authorized dealer for the replacement LED
module.
Replacing rear turn signal bulbs
1. Make sure the headlamp switch is in the OFF position and open the
trunk.
2. Lift out trunk floor carpeting panel to access a Luggage Scuff Plate
(Hard Molding) shingles and a Trunk Side Panel (dark grey, soft
wheelhouse side trim panel) at the lamp area.
3. Carefully pull/push the Trunk Side Panel (dark grey, soft wheelhouse
side trim panel) outboard to expose the lamp assembly. The most
effective point to grasp the Trunk Side Panel when pulling it out from
the Luggage Scuff Plate is at it’s bottom edge where that edge meets the
exposed sheet metal of the trunk floor.
2008 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
64