Owner's Manual
Table Of Contents
- Table of Contents
- Introduction
- Instrument Cluster
- Entertainment Systems
- AUDIO SYSTEMS
- GENERAL AUDIO INFORMATION
- NAVIGATION SYSTEM (IF EQUIPPED)
- SYNC SYSTEM (LATE AVAILABILITY — IF EQUIPPED)
- Climate Controls
- Lights
- Driver Controls
- MULTI-FUNCTION LEVER
- TILT/TELESCOPE STEERING WHEEL
- ILLUMINATED VISOR MIRROR (IF EQUIPPED)
- OVERHEAD CONSOLE
- CENTER CONSOLE
- CLOCK
- INSTRUMENT PANEL STORAGE COMPARTMENT
- AUXILIARY POWER POINT (12VDC)
- POWER WINDOWS
- INTERIOR MIRROR
- EXTERIOR MIRRORS
- SPEED CONTROL
- STEERING WHEEL CONTROLS (IF EQUIPPED)
- MOON ROOF (IF EQUIPPED)
- MESSAGE CENTER
- Selectable features
- Reset
- Info menu
- Odometer/Trip odometer
- Distance to empty (DTE)
- Average fuel economy (AFE)
- Average Speed
- Trip elapsed drive time
- Compass display (if equipped)
- Compass zone/calibration adjustment
- Setup menu
- System check
- Units (English/Metric)
- Language
- Easy entry/exit (if equipped)
- Reverse Sensing System (Park assist) (if equipped)
- System warnings
- Selectable features
- INTERIOR TRUNK CONTROL
- Locks and Security
- KEYS
- POWER DOOR LOCKS
- CHILDPROOF DOOR LOCKS
- INTERIOR LUGGAGE COMPARTMENT RELEASE
- REMOTE ENTRY SYSTEM
- KEYLESS ENTRY SYSTEM (IF EQUIPPED)
- SECURILOCK™ PASSIVE ANTI-THEFT SYSTEM
- PERIMETER ALARM SYSTEM
- Seating and Safety Restraints
- SEATING
- REAR SEATS
- SAFETY RESTRAINTS
- Personal Safety System™
- How does the Personal Safety System™ work?
- Driver and passenger dual-stage airbag supplemental restraints
- Front crash severity sensor
- Driver’s seat position sensor
- Front passenger sensing system
- Front safety belt usage sensors
- Front safety belt pretensioners
- Front safety belt energy management retractors
- Determining if the Personal Safety System™ is operational
- Safety belt precautions
- Combination lap and shoulder belts
- Energy Management Feature — Front Outboard
- Vehicle sensitive mode
- Automatic locking mode
- Safety belt pretensioner
- Safety belt height adjustment
- Safety belt extension assembly
- Safety belt maintenance
- Safety belt warning light and indicator chime
- Conditions of operation
- Belt-Minder
- Personal Safety System™
- AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
- Important supplemental restraint system precautions
- Children and airbags
- How does the safety belt pretensioner and airbag supplemental restraint system work?
- Front passenger sensing system
- Determining if the system is operational
- Seat-mounted side airbag system
- Side curtain airbag system
- Disposal of airbags and airbag equipped vehicles (including pretensioners)
- SAFETY RESTRAINTS FOR CHILDREN
- SAFETY SEATS FOR CHILDREN
- Tires, Wheels and Loading
- Driving
- Roadside Emergencies
- Customer Assistance
- GETTING THE SERVICES YOU NEED
- IN CALIFORNIA (U.S. ONLY)
- THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY)
- UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY)
- FORD EXTENDED SERVICE PLAN
- GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA
- ORDERING ADDITIONAL OWNER’S LITERATURE
- REPORTING SAFETY DEFECTS (U.S. ONLY)
- REPORTING SAFETY DEFECTS (CANADA ONLY)
- Cleaning
- Maintenance and Specifications
- SERVICE RECOMMENDATIONS
- PRECAUTIONS WHEN SERVICING YOUR VEHICLE
- OPENING THE HOOD
- IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
- WINDSHIELD WASHER FLUID
- CHANGING THE WIPER BLADES
- ENGINE OIL
- BATTERY
- ENGINE COOLANT
- FUEL FILTER
- WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS
- ESSENTIALS OF GOOD FUEL ECONOMY
- EMISSION CONTROL SYSTEM
- POWER STEERING FLUID
- BRAKE/CLUTCH FLUID
- TRANSAXLE FLUID
- AIR FILTER
- MOTORCRAFT PART NUMBERS
- MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
- ENGINE DATA
- IDENTIFYING YOUR VEHICLE
- TRANSMISSION/TRANSAXLE CODE DESIGNATIONS
- Accessories
- Index
AIMING THE HEADLAMPS
The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident the alignment of your headlamps
should be checked by your authorized dealer.
Vertical aim adjustment
1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.
• (1) 8 feet (2.4 meters)
• (2) Center height of lamp to
ground
• (3) 25 feet (7.6 meters)
• (4) Horizontal reference line
2. Measure the height of the
headlamp bulb center from the
ground and mark an 8 foot
(2.5 meter) horizontal reference line
on the vertical wall or screen at this
height (a piece of masking tape works well).
3. Turn on the low beam headlamps to illuminate the wall or screen and
open the hood.
To see a clearer light pattern for adjusting, you may want to block the
light from one headlamp while adjusting the other.
4. On the wall or screen you will
observe an area of high intensity
light. The top of the high intensity
area should touch the horizontal
reference line, if not, the beam will
need to be adjusted using the next
step.
2008 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
55