Owner's Manual
Table Of Contents
- Table of Contents
- Introduction
- Instrument Cluster
- Entertainment Systems
- AUDIO SYSTEMS
- GENERAL AUDIO INFORMATION
- NAVIGATION SYSTEM (IF EQUIPPED)
- SYNC SYSTEM (LATE AVAILABILITY — IF EQUIPPED)
- Climate Controls
- Lights
- Driver Controls
- MULTI-FUNCTION LEVER
- TILT/TELESCOPE STEERING WHEEL
- ILLUMINATED VISOR MIRROR (IF EQUIPPED)
- OVERHEAD CONSOLE
- CENTER CONSOLE
- CLOCK
- INSTRUMENT PANEL STORAGE COMPARTMENT
- AUXILIARY POWER POINT (12VDC)
- POWER WINDOWS
- INTERIOR MIRROR
- EXTERIOR MIRRORS
- SPEED CONTROL
- STEERING WHEEL CONTROLS (IF EQUIPPED)
- MOON ROOF (IF EQUIPPED)
- MESSAGE CENTER
- Selectable features
- Reset
- Info menu
- Odometer/Trip odometer
- Distance to empty (DTE)
- Average fuel economy (AFE)
- Average Speed
- Trip elapsed drive time
- Compass display (if equipped)
- Compass zone/calibration adjustment
- Setup menu
- System check
- Units (English/Metric)
- Language
- Easy entry/exit (if equipped)
- Reverse Sensing System (Park assist) (if equipped)
- System warnings
- Selectable features
- INTERIOR TRUNK CONTROL
- Locks and Security
- KEYS
- POWER DOOR LOCKS
- CHILDPROOF DOOR LOCKS
- INTERIOR LUGGAGE COMPARTMENT RELEASE
- REMOTE ENTRY SYSTEM
- KEYLESS ENTRY SYSTEM (IF EQUIPPED)
- SECURILOCK™ PASSIVE ANTI-THEFT SYSTEM
- PERIMETER ALARM SYSTEM
- Seating and Safety Restraints
- SEATING
- REAR SEATS
- SAFETY RESTRAINTS
- Personal Safety System™
- How does the Personal Safety System™ work?
- Driver and passenger dual-stage airbag supplemental restraints
- Front crash severity sensor
- Driver’s seat position sensor
- Front passenger sensing system
- Front safety belt usage sensors
- Front safety belt pretensioners
- Front safety belt energy management retractors
- Determining if the Personal Safety System™ is operational
- Safety belt precautions
- Combination lap and shoulder belts
- Energy Management Feature — Front Outboard
- Vehicle sensitive mode
- Automatic locking mode
- Safety belt pretensioner
- Safety belt height adjustment
- Safety belt extension assembly
- Safety belt maintenance
- Safety belt warning light and indicator chime
- Conditions of operation
- Belt-Minder
- Personal Safety System™
- AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
- Important supplemental restraint system precautions
- Children and airbags
- How does the safety belt pretensioner and airbag supplemental restraint system work?
- Front passenger sensing system
- Determining if the system is operational
- Seat-mounted side airbag system
- Side curtain airbag system
- Disposal of airbags and airbag equipped vehicles (including pretensioners)
- SAFETY RESTRAINTS FOR CHILDREN
- SAFETY SEATS FOR CHILDREN
- Tires, Wheels and Loading
- Driving
- Roadside Emergencies
- Customer Assistance
- GETTING THE SERVICES YOU NEED
- IN CALIFORNIA (U.S. ONLY)
- THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY)
- UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY)
- FORD EXTENDED SERVICE PLAN
- GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA
- ORDERING ADDITIONAL OWNER’S LITERATURE
- REPORTING SAFETY DEFECTS (U.S. ONLY)
- REPORTING SAFETY DEFECTS (CANADA ONLY)
- Cleaning
- Maintenance and Specifications
- SERVICE RECOMMENDATIONS
- PRECAUTIONS WHEN SERVICING YOUR VEHICLE
- OPENING THE HOOD
- IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
- WINDSHIELD WASHER FLUID
- CHANGING THE WIPER BLADES
- ENGINE OIL
- BATTERY
- ENGINE COOLANT
- FUEL FILTER
- WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS
- ESSENTIALS OF GOOD FUEL ECONOMY
- EMISSION CONTROL SYSTEM
- POWER STEERING FLUID
- BRAKE/CLUTCH FLUID
- TRANSAXLE FLUID
- AIR FILTER
- MOTORCRAFT PART NUMBERS
- MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
- ENGINE DATA
- IDENTIFYING YOUR VEHICLE
- TRANSMISSION/TRANSAXLE CODE DESIGNATIONS
- Accessories
- Index

Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal
code.
Erasing personal code
1. Enter the factory set 5–digit code.
2. Within five seconds, press the 1 • 2 on the keypad and release.
3. Press and hold the 1 • 2 for two seconds. This must be done within
five seconds of completing Step 2.
All personal codes are now erased and only the factory set 5–digit code
will work.
Anti-scan feature
If the wrong code has been entered 7 times (35 consecutive button
presses), the keypad will go into an anti-scan mode. This mode disables
the keypad for one minute and the keypad lamp will flash.
The anti-scan feature will turn off after:
• one minute of keypad inactivity.
• pressing the UNLOCK
control on the remote entry transmitter
portion of your Integrated Keyhead Transmitter.
• the ignition is turned to the 3 (RUN) position.
Unlocking and locking the doors using keyless entry
To unlock the driver’s door, enter the factory set 5-digit code or your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate. Note: If the two-stage unlocking
feature is disabled, all doors will unlock; for more information regarding
two-stage unlocking, refer to the Two stage unlocking section earlier in
this chapter.
To unlock all doors, enter the factory set code or your personal code,
then press the 3 • 4 control within five seconds.
To open the trunk, enter the factory set code or your personal code,
then press the 5 • 6 control within five seconds.
To lock all doors, press the 7 • 8 and the 9 • 0 at the same time (with
the driver’s door closed). You do not need to enter the keypad code
first.
2008 Milan (mln)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
107