Maintenance and Service Guide

90,000 miles
Change engine oil and replace oil filter
Vehicles equipped with the TorqShift transmission
and the externally-mounted remote filter element,
replace the automatic transmission fluid and
the externally-mounted remote filter element (if
equipped). Inspect automatic
transmission/transaxle fluid level on all other
vehicles if equipped with dipstick. Consult your
dealer for particular requirements.
Replace cabin air filter (if equipped)
Replace climate-controlled seat filter (if equipped)
Replace engine air filter
Replace fuel filter
Replace spark plugs
Inspect steering linkage, suspension and, if
equipped, driveshaft, ball joints and U-joints
Inspect engine cooling system and hoses
Inspect brake pads, shoes, rotors, drums, brake
lines and hoses and parking brake system.
Inspect half shaft boots (if equipped)
Inspect exhaust system and heat shields
Inspect drive belts
Lubricate ball joints and U-joints (if equipped
with zerk fittings)
Inspect and lubricate 4x4 front axle U-joints
Perform multi-point inspection (recommended)
Rotate tires, inspect tires for wear and measure
tread depth (vehicles with dual rear wheels
should only rotate if unusual wear is noted)
Inspect wheels for end play and noise
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
97,500 miles
Change engine oil and replace oil filter
Perform multi-point inspection (recommended)
Rotate tires, inspect tires for wear and measure
tread depth (vehicles with dual rear wheels
should only rotate if unusual wear is noted)
Inspect wheels for end play and noise
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
N
ORMAL
S
CHEDULE
T
RUCKS
,F
ULLSIZE
V
ANS
& SUV
S
Scheduled Maintenance
23
2008 (smg)
Scheduled Maintenance Guide
USA (fus)
Normal Schedule
Trucks, Fullsize
Vans & SUVs