Owner's Manual

PANEL DIMMER CONTROL

Use to adjust the brightness of the

instrument panel and all applicable

switches in the vehicle during

headlamp and parklamp operation.

Move the control to the full upright

position, past detent, to turn on the

interior lamps.

Rotate to full down position (past

detent) to prevent interior lamps

from illuminating when the doors

are opened.

AIMING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.

If your vehicle has been in an accident the alignment of your headlamps

should be checked by your authorized dealer.

Vertical aim adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,

approximately 25 feet (7.6 meters) away.

• (1) 8 feet (2.4 meters)

• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)

• (4) Horizontal reference line

Measure the height from the center

of your headlamp to the ground and

mark an 8 foot (2.4 meter) horizontal

reference line on the vertical wall or

screen at this height (a piece of

masking tape works well). The center of the lamp is marked by a 3.0 mm

circle on the headlamp lens.

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood. Cover the left-hand headlamp with an opaque cloth.

2008 Mariner Hybrid (mhv)

Owners Guide (post-2002-fmt)

USA (fus)

Lights