Owner's Manual

Table Of Contents
Item Capacity
Ford Part Name or
equivalent
Ford Part Number /
Ford Specification
Transmission fluid
10.2 quarts
(9.6L)
3
Motorcraft MERCON V
ATF
4
XT-5-QM /
MERCON V
Power steering fluid
Fill to line on
reservoir
Motorcraft MERCON
ATF
XT-2-QDX /
MERCON
Rear axle fluid (4X4)
5
2.96 pints (1.4L)
6
Motorcraft SAE 80W-90
Premium Rear Axle
Lubricant
XY-80W90-QL /
WSP-M2C197-A
Power Transfer Unit
fluid (4X4)
7
12 ounces (0.35L)
Motorcraft SAE 75W-140
Synthetic Rear Axle
Lubricant
XY-75W140-QL /
WSL-M2C192-A
Windshield washer fluid 2.7 quarts (2.6L)
Motorcraft Premium
Windshield Washer
Concentrate
ZC-32-A /
WSB-M8B16-A2
Fuel tank
16.5 gallons
(62.5L)
——
1
Add the coolant type originally equipped in your vehicle.
2
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
3
Indicates only approximate dry-fill capacity. The amount of transmission fluid and fluid level
should be set by the indication on the dipstick’s normal operating range.
4
Automatic transmissions that require MERCON V should only use MERCON V fluid or fluid that
is specified dual usage MERCON/ MERCON V. Refer to scheduled maintenance information to
determine the correct service interval. Use of any fluid other than the recommended fluid may
cause transmission damage.
2007 Mariner (mrn)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
265