Owner's Manual

Item Capacity Ford part name
Ford part number /
Ford specification
Automatic
transmission fluid
(4R75E)
13.9 quarts
(13.2L)
3
Motorcraft MERCON威 VATF
4
XT-5-QM /
MERCON威 V
Rear axle fluid
5
5.0 pints (2.4L)
6
Motorcraft SAE 80W-90
Premium Rear Axle Lubricant
XY-80W90-QL /
WSP-M2C197-A
Windshield washer
fluid
Fill to line on
reservoir
Motorcraft Premium
Windshield Washer
Concentrate
ZC-32-A /
WSB-M8B16-A2
Fuel Tank
19.0 gallons
(71.9L)
——
1
Add the coolant type originally equipped in your vehicle.
2
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
3
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and
if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick’s normal operating range.
4
Automatic transmissions that require MERCON威 V should only use MERCON威 V fluid or fluid that
is specified dual usage MERCON威/MERCON威 V. Refer to scheduled maintenance information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage.
5
Rear axles are considered lubricated for life when the vehicle is used for normal service. For
severe duty requirements, see Exceptions and / or Special Operating Conditions in scheduled maintenance information. Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok rear axles.
6
Service refill capacities are determined by filling the rear axle 1/4 inch to 9/16 inch (6 mm to 14
mm) below the bottom of the filler hole.
2007 Grand Marquis (grn)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
257