Maintenance and Service Guide

100,000 miles
Change engine oil and replace oil filter.
Inspect tires for wear. Rotation recommended for
optimal tire life.
Inspect accessory drive belt(s).
Replace spark plugs.
Change Premium Gold coolant (see exceptions
page 45 and record page 46).
Replace PCV valve on all light trucks under
6,000 Gross Vehicle Weight (except 5.4L
3V engines).
Drain coalescent fuel filter bowl and replace filter
(natural gas only).
Clean injectors (natural gas only).
Multi-point inspection (recommended)
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
105,000 miles
Change engine oil and replace oil filter.
Inspect tires for wear and rotate.
Inspect automatic transmission fluid level, if
equipped with dipstick.
Inspect brake pads/shoes/rotors/drums, brake
lines & hoses, and parking brake system.
Inspect wheel ends for endplay and noise.
Inspect engine cooling system and hoses.
Inspect steering linkage, ball joints, suspension
and, if equipped, half shafts, driveshaft and
u-joints.
Replace cabin air filter, if equipped.
Lubricate 4X2 ball joints and steering linkage if
equipped with zerk fittings.
Inspect and lubricate 4X4 front axle shaft u-joints
(F250/350/450/550 and Excursion).
Multi-point inspection (recommended)
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
N
ORMAL
S
CHEDULE
T
RUCKS
,F
ULLSIZE
V
ANS
& SUV
S
24
Scheduled Maintenance
Normal Schedule Trucks, Fullsize Vans & SUVs