Maintenance and Service Guide

90,000 miles
Change engine oil and replace oil filter.
Inspect tires for wear and rotate.
Inspect brake pads/shoes/rotors/drums, brake
lines & hoses, and parking brake system.
Inspect wheel ends for endplay and noise.
Inspect engine cooling system and hoses.
Inspect exhaust system and heat shields.
Inspect steering linkage, ball joints, suspension
and, if equipped, half shafts, driveshaft and
u-joints.
Replace engine air filter.
Replace fuel filter (except natural gas) (see page
46).
Replace cabin air filter, if equipped.
Change automatic transmission fluid on all
vehicles equipped with 4R100. Inspect
automatic transmission/transaxle fluid level on
all other vehicles, if equipped with
dipstick. Consult your dealer for your particular
requirements.
Replace climate-controlled seat filters (Navigator,
Expedition and Aviator) if equipped.
Lubricate 4X2 ball joints and steering linkage if
equipped with zerk fittings.
Inspect and lubricate 4X4 front axle shaft u-joints
(F250/350/450/550 and Excursion).
Inspect fuel tanks (natural gas and propane
only).
Multi-point inspection (recommended)
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
95,000 miles
Change engine oil and replace oil filter.
Inspect tires for wear. Rotation recommended for
optimal tire life.
Multi-point inspection (recommended)
DEALER VALIDATION:
RO#: P&A C
ODE:
D
ATE:MILEAGE:
N
ORMAL
S
CHEDULE
T
RUCKS
,F
ULLSIZE
V
ANS
& SUV
S
Scheduled Maintenance
23
Normal Schedule Trucks, Fullsize Vans & SUVs
Normal Schedule
Trucks, Fullsize
Vans & SUVs