Owner's Manual

1. Turn the ignition key to RUN, then press the power door UNLOCK

control button 3 times.

2. Turn the ignition key to OFF, then press the power door UNLOCK

control button 3 times.

3. Turn the ignition key to RUN, within five seconds press the power

door UNLOCK control button 2 times.

The user should receive two horn chirps to indicate the system had

been altered.

Note: Puddle lamps cannot be deactivated, only the head, park, and tail

lamps will be deactivated/activated.

• Turn ignition to OFF to exit.

KEYLESS ENTRY SYSTEM (IF EQUIPPED)

With the keyless entry keypad, you

can:

• lock or unlock the vehicle doors

and liftgate (wagons) without using the key.

• open the trunk.

• arm and disarm the perimeter alarm system (if equipped).

See also Remote entry system and Perimeter alarm system in this

chapter for more information.

Your vehicle has a factory-set 5–digit code that operates the keyless

entry system. You can also program your own 5–digit personal entry

code.

The factory-set code is located:

• On the owner’s wallet card in the glove compartment,

• On the inner side of the passenger compartment fuse box, or

• At your dealer.

When using the keyless entry keypad, press the middle of each button in

order to ensure a good activation.

1 2

45678

Locks and Security