Installation manual

200/225/250/275 VERADO 4-STROKE
90-10238051 Page 23 / 51
1. Pull out the grommet fitting from the front cowl opening. Route the wiring harnesses,
battery cables, and fuel hose through the correct openings in the rubber grommet as
shown.
F
H
B
AWT
B
3723
c
b
a
f
e
h
d
g
a - Rubber grommet
b - Fuel hose
c - 14 pin data harness
d - DTS power harness, vessel sensor harness, power steering pump harness
e - Large diameter battery cables
f - Small diameter battery cables
g - Grommet fitting
h - Front cowl opening
2. Insert rubber grommet into fitting and secure fitting in front cowl opening.
Fuel Hose Connection
FUEL HOSE SIZE
IMPORTANT: Fuel line inside diameter (I.D.) must be 10 mm (3/8 in.) with separate fuel
line/fuel tank pickup for each engine.
Fasten remote fuel hose to fitting with hose clamp.
a
b
3730
F
E
a - Remote fuel hose b - Hose clamp