Installation manual

3-7

90-898305

a) Air Inlet

b) Air Filter

c) Compressor Oil Inlet

d) Excess Oil Return

e) Compressor Air Inlet

f) Compressor Water Inlet

g) Fuel System Pressure Test

Valve

h) #2 Fuel Injector

i) Port Fuel Rail

j) Excess Fuel Return to VST

k) #4 Fuel Injector

l) 40 psi Check Valve

m) Air Pressure Test Valve

n) Excess Air Return to Exhaust

Adaptor Plate

o) #6 Fuel Injector

p) Water Inlet to Fuel Rail

q) Air [79 _ 2 psi (544.0 _ 13.8

kPa)]

r) High Pressure Fuel [89 _ 2 psi

(613.5 _ 13.8)]

s) Air Regulator [79 _ 2 psi (544.0

_ 13.8 kPa)]

t) Fuel Regulator [89 _ 2 psi

(613.5 _ 13.8)]

u) Water Outlet (tell-tale)

v) #1 Fuel Injector

w) Starboard Fuel Rail

x) #3 Fuel Injector

y) #5 Fuel Injector

z) Tracker

aa) Low Pressure (Air)

ab) High Pressure (Air)

Tip: The Schrader Valve Test Ports have changed by model year.

1998-1999 MY – Air is Port and Fuel is starboard. For 2000 MY and

Up – See Service Manual for correct locations.

NOTE: Typical example, component location will vary on other models.

Notes

_______________________