Installation manual

2-7
90-898305
Model 175 Optimax
2001 MY
This engine is based on the 2.5 Litre OptiMax. Differences between 175 HP
and the 150 HP, 2.5 Litre OptiMax are:
ECM calibration
Head bolts for the 175 heads will be _ inch shorter then the 135 and 150
HP.
New open chambered cylinder head for increased power.
Cylinder liners (different porting)
Added holes in flywheel cover for increased airflow into air plenum to help
increase HP. Same cover will be used on 135 and 150 HP; calibration will
be changed on these models to keep HP within range.
Notes
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________