Installation manual

90-898305
1-72
Power Trim
• Common power trim with current 75 -125 2-stroke
• Analog power trim position sender kit will be standard after S/N 0T846415.
Lower Unit
• Gear Ratios
- 75/90 2.33:1 Teeth 28/12
- 115 2.07:1 Teeth 29/14
• Internal components common with current 75 – 125 2-stroke, except drive
shaft. Drive shaft is longer to get proper driveshaft to crankshaft
engagement. Lower unit complete is not interchangeable with current 75 –
125 2-stroke. The pinion gear teeth identification decal will have an
LIGHT/GRAY background with BLACK letters, for 1.5 Liter OptiMax
engines.
• This engine may see prop rattle when using stainless steel and some
aluminum props. Using the Flow Torque III prop hub will eliminate most of
the prop rattle.
Performance Gear Lube
2.5L, 3.0L, Verado L4 SC and Verado L6 (at time of print) will receive the
Hi-Performance gear lubrication. The V-6 product recommendation in the
operations manual will be changed to state the use of the Hi-performance
lub.
Notes
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________