Installation manual

1-71
90-898305
Accessories
1.5L ACCESSORIES:
• Three gallon remote oil tank kit P/N 1257-8742A25
• Tiller handle kit, will not be ready for start of production estimated to be
ready late summer 2003.
• Costal Flush kit P/N 858566A02 is a hose that is run out the front of the
cowling to attach a hose to flush the engine. This will be standard on salt
water version.
• Tilt limit switch kit P/N 87-887979A2. Same switch kit currently used on
the 3.0 Liter, with up-dated instruction sheet.
• Analog power trim position sender kit will be standard on later models.
• SmartCraft speedo sensor kit.
• Water pressure gauge “TEE” fitting/hose kit will be standard on later
models.
• Tiller handle kits.
GAUGES
• Engine will support all analog gauges except block/water temperature.
• Engine is SmartCraft compatible
Notes
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________