Installation manual

1-39
90-898305
2. Remove the throttle only button covering the hex nut in the base of the
remote control using a screwdriver or similar tool.
3. Move the remote control into the NEUTRAL (N) position.
4. Install the appropriate shift tool on the hex nut at the base of the remote
control.
a. If the neutral lock button is on the bottom of the handle, push the
neutral lock button in and install the clevis pin.
Notes
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________