Installation manual

1-37
90-898305
Console Mount Remote Controls
1. When measuring cable length for a console mount remote control, measure
along theactual selected cable routing path and add 18 inches (457 mm) to
the total.
2. Divide by 12 in. (304 mm).
3. This is the length of the throttle and shift cables in feet.
NOTE: Allow for clearance of cables directly behind panel mount remote
control and under console mount remote control. The Commander 3000
Series Panel Mount Remote Control mounting surface must not exceed 1 in.
(25.4 mm) thickness. Cable radius at any point must not be less than 12 in.
(304.8 mm). On boats with considerable freeboard drop or unusual routing of
cables, it may be necessary to add extra length to cables.
Notes
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________
_______________________