Installation manual

1-11

90-898305

Connecting Battery Cables and DTS Power Harness

• Install DTS power harness directly to the starting battery only.

• Do not extend lead length of harness.

• See accessory manual for optional lead connection kit.

System Wiring Reference Points DTS

• DTS power harness - Provides 12V power to the DTS system. Requires

connection to the starting battery. If starting battery is located at the helm,

DTS power harness accessory kit is required to minimize voltage drop. Use

cable ties to secure power harness leads to battery cables, beginning within

15 cm (6 in.) of battery posts and continuing along the entire length of the

harness.

• Battery cables - Connect to the starting battery.

• Vessel sensor harness - This harness connects to the main fuel tank sensor,

auxiliary fuel tank and the paddle wheel speed/temperature sensor, if

equipped.

Notes

_______________________