Owner's Manual

SecuriLocky keys and the new
unprogrammed SecuriLocky key
readily accessible for the
procedure. Please read and
understand the entire procedure
before you begin.
1. Insert the first previously
programmed SecuriLocky key into
the ignition switch and turn the
ignition from OFF to RUN
(maintain ignition in RUN for at
least one second).
2. Turn ignition to OFF and
remove the first SecuriLocky key
from the ignition switch.
3. Within five seconds of turning
the ignition to OFF, insert the
second previously programmed
SecuriLocky key into the ignition
switch and turn the ignition from
OFF to RUN (maintain ignition in
RUN for at least one second but no
more than 5 seconds).
4. Turn the ignition to OFF and
remove the second SecuriLocky
key from the ignition switch.
5. Within 10 seconds of turning the
ignition to OFF, insert the
unprogrammed SecuriLocky key
(new key) into the ignition switch
and turn the ignition from OFF to
RUN (maintain ignition switch in
RUN for at least one second). This
step will program your new
SecuriLocky key.
6. If it is desired to program
additional SecuriLocky key(s),
repeat this procedure from step 1.
Controls and features
60