Owner's Manual

Erasing personal code
1. Enter the factory-set code.
2. Press 1/2 within five seconds of
step one.
3. Press the 7/8 and 9/0 controls at
the same time within five seconds
of step two.
The system will now only respond
to the factory-set code.
Unlocking the doors with the
keyless entry system
To unlock the driver’s door, enter
either the factory-set code or
personal code (each digit pressed
within 5 seconds of the prior
digit). The interior lamps will
illuminate.
To unlock all doors, enter the
factory-set code or personal code
(driver door unlocks) and press
the 3/4 control within 5 seconds.
Locking the doors with the
keyless entry system
To lock all the doors, press 7/8 and
9/0 at the same time. It is not
necessary to first enter the keypad
code.
This will arm your perimeter alarm
system (if equipped). Refer to
Perimeter alarm system in this
chapter for more information.
1 2
3
45678
9
0
12
3
45678
9
0
12
3
45678
9
0
Controls and features
54