Owner's Manual

• license plate lamp
• tail lamps
• back-up lamps
Do not remove lamp bulbs unless
they can be replaced immediately
with new ones. If a bulb is
removed for an extended period of
time, contaminants may enter the
lamp housings and affect lamp
performance.
Replacing headlamp bulbs
Handle a halogen
headlamp bulb carefully
and keep out of children’s reach.
Grasp the bulb only by its plastic
base and do not touch the glass.
The oil from your hand could
cause the bulb to break the next
time the headlamps are
operated.
If the bulb is accidentally
touched, it should be cleaned
with rubbing alcohol before
being used.
To remove the headlamp bulb:
1. Make sure headlamp switch is in
OFF position, then open the hood.
If you are replacing the driver side
headlamp, unclip the electronic
module on the right side of the
battery and move it out of the way.
2. Locate the headlamp bulb
through the hole in the upper
radiator support assembly.
Maintenance and care
191