Maintenance and Service Guide

❑ Lubricate driveshaft U-joint if equipped with grease fittings and

lubricate slip yoke (if equipped).

❑ Inspect exhaust system for leaks, damage or loose parts. Remove any

foreign material trapped by exhaust system shielding.

NOTE: It is normal for a certain amount of moisture and staining to be

present around the muffler seams. The presence of soot, light surface

rust or moisture does not indicate a faulty muffler.

DEALER AUTHORIZATION

Date:

Mileage:

96,000 KILOMETERS (60,000 MILES)

❑ Change engine oil and replace oil filter.

❑ Inspect engine cooling system, hoses, and clamps; check coolant

strength every 24,000 km (15,000 miles) or 12 months.

❑ Replace air cleaner filter every 50,000 km (30,000 miles) or 30

months.

❑ Replace PCV valve. (2)

❑ Inspect accessory drive belts. (4.0L engines)

❑ Lubricate throttle kickdown or TV lever ball studs.

❑ Change fuel filter (Recommended but not required for California

Certified Vehicles).

❑ Change automatic transmission fluid. (5.0L engines)

❑ Inspect disc brake system and lubricate caliper slide rails.

❑ Inspect drum brake systems, hoses and lines.

❑ Inspect and lubricate front wheel bearings. (4x2 vehicles)

❑ Inspect parking brake system for damage and operation.

❑ Change transfer case fluid (4x4 and AWD vehicles).

DEALER AUTHORIZATION

Date:

Mileage:

Normal schedule