Owner's Manual

Electronic Sound Systems
35
[AS03000(ALL)03/93]
Setting the station memory preset buttons
[AS03100(ALL)06/95]
Your radio is equipped with 6 station memory buttons. These
buttons can be used to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2). Follow the easy steps
below to set these buttons to the desired frequencies:
*
[AS03200(ALL)03/96] 1. Select a band, then select a frequency.
*
[AS03400(ALL)10/95] 2. Press one of the memory preset buttons and hold the button
until the sound returns. That station is now held in memory
on that button.
*
[AS03500(ALL)10/95] 3. Follow the two steps above for each station memory preset
button you want to set.
[AS03550(ALL)09/95]
NOTE: If the vehicle’s battery is disconnected, the Station
Memory Preset buttons will need to be reset.
[AS03600(ALL)06/95]
■ Using the Automatic Memory Store feature (Supersound
only)
[AS03900(ALL)07/95]
Activate Auto Memory Store by pushing the “AUTO SET”
button once. Your radio will set the first six strong stations
of the band you are in (AM, FM1 or FM2) into the memory
buttons. The display will show “AUTO,” then run through
the frequencies, stopping momentarily on the stations being
set into the memory buttons. The radio is now in the
“AUTO” mode and this display will show “AUTO” each
time a preset selected by “AUTO SET” is activated.
[AS03950(ALL)05/96]
With Auto Memory Store, you can continually set strong
stations into your memory buttons without losing your
existing memory presets, which is especially helpful while
traveling. Your radio will automatically set your memory
buttons to the strong local stations so you don’t have to
continually manually tune to existing stations.
File:04vxasn.ex
Update:Thu May 30 09:46:22 1996