Owner's Manual

Roadside Emergencies
267
*
[ER00775(ALL)01/96] 7. Turn the lug nut wrench (attached to the jack handle)
clockwise to raise the vehicle off the ground.
*
[ER00780(ALL)01/96] 8. Remove the wheel lug nuts with the lug nut wrench.
*
[ER00785(ALL)01/96] 9. Remove the flat tire and replace it with the spare tire.
*
[ER00790(ALL)01/96] 10.Place the wheel lug nuts on the spare tire. Use the lug nut
wrench to screw the lug nuts snug against the wheel, but do
not tighten fully.
*
[ER00795(ALL)01/96] 11.Lower the vehicle by turning the jack handle
counterclockwise.
*
[ER00800(ALL)01/96] 12.Use the wheel lug wrench to tighten lug nuts in the
appropriate sequence. Re-check for complete tightness.
%
*
[ER00805(ALL)01/96]
7-1/2 pica art:0040176-A
Lug nut tightening sequence
[ER00810(ALL)01/96]
The lug nuts should be tightened to 72-87 ft-lb (98-118 N%m).
File:10vxern.ex
Update:Thu May 30 09:55:50 1996