Owner's Manual

Driving
237
*
[GF19200(ALL)01/96]
Do not use single clamp bumper hitches or hitches that attach
to the axle.
*
[GF19300(ALL)01/96]
Whenever a trailer hitch and hardware are removed, make sure
all mounting holes in the underbody are properly sealed to
prevent exhaust fumes from entering the vehicle.
*
[GF19400(ALL)01/96]
Safety chains
*
[GF19500(ALL)01/96]
Always use safety chains between your vehicle and trailer.
Cross chains under the trailer tongue and allow slack for
turning corners. Connect safety chains to the vehicle frame or
hook retainers. Never attach chains to the bumper.
%
*
[GF19600(ALL)01/96]
Trailer Brakes
*
[GF19700(ALL)01/96]
Separate trailer brakes are required on most trailers weighing
over 1,500 lbs. (680 kg).
*
[GF19800(ALL)05/96]
RWARNING
Do not connect a trailer’s hydraulic brake system directly
to your vehicle’s brake system. Your vehicle may not
have enough braking power and your chances of having
a collision greatly increase.
%
*
[GF19900(ALL)01/96]
Trailer Lamps
*
[GF20000(ALL)01/96]
Make sure your trailer lamps conform to federal and local
regulations.
*
[GF20100(ALL)01/96]
Class I Trailer Tow electrical wiring provides two circuits (right
hand and left hand) to operate trailer stop/turn tail lamps. Each
stop/turn circuit will operate one combination stop/turn light
bulb (# 1157, 3157, 2357, or 3357) on the trailer. Never add more
than one trailer light bulb to one circuit.
File:09vxgfn.ex
Update:Thu May 30 09:54:10 1996