Owner's Manual

224
%
*
[MC40200(ALL)01/96
]
Fabric
*
[MC40300(ALL)01/96]
Remove dust and loose dirt with a whisk broom or a vacuum
cleaner. Remove fresh spots immediately. Follow the directions
that come with the cleaner.
*
[MC40400(ALL)01/96]
NOTE: Before using any cleaner, test it on a small, hidden
area of fabric. If the fabric’s color or texture is
adversely affected by a particular cleaner, do not use
it.
*
[MC40500(ALL)01/96]
Cleaning the Engine
*
[MC40600(ALL)01/96]
A clean engine is more efficient because a buildup of grease and
dirt acts as an insulator, keeping the engine warmer than usual.
*
[MC40700(ALL)01/96]
■ Extreme care must be used if a power washer is used to
clean the engine. The high pressure fluid could penetrate
sealed parts and assemblies causing damage or malfunctions.
*
[MC40800(ALL)04/96]
■ In order to avoid possible cracking of the engine block or
fuel injection pump, do not spray a hot engine or injection
pump with cold water.
*
[MC40900(ALL)04/96]
■ The alternator, distributor and air intake must be covered.
Covering these components will help prevent water damage.
*
[MC41000(ALL)01/96]
■ Never wash or rinse the engine while it is running. Water
getting into the engine may cause internal damage.
%
*
[MC41100(ALL)03/96
]
Cleaning the Wheels
*
[MC41200(ALL)03/96]
Wash the wheels with the same detergent you use to wash your
vehicle’s body. Do not use acid-based wheel cleaners, steel wool,
abrasives, fuel, or strong detergents. These substances will
damage protective coatings. Use tar and road oil remover to
remove grease and tar.
*
[MC41300(ALL)03/96]
NOTE: Before going to a car wash, find out if the brushes are
abrasive.
File:11cdmcz.ex
Update:Wed May 22 12:13:37 1996