Owner's Manual

168
*
[ER11600(ALL)02/96] 4. Check all battery terminals and remove any excessive
corrosion before you attach the jumper cables.
*
[ER11700(ALL)03/96] 5. Turn on the heater fan in both vehicles. Press the DEFROST
button. Turn off all other switches and gauges.
%
*
[ER11800(ALL)02/96]
Connecting the jumper cables
*
[ER11900(ALL)02/96] 1. Connect one end of the first jumper cable to the positive (+)
terminal of the discharged battery. (You can connect either
jumper cable to the positive (+) terminal, as long as you use
the same cable for both positive terminals.) Most jumper
cables have a red cable and a black cable. The red cable is
generally used for the positive terminals and the black for
the negative ones.
*
[ER12000(ALL)02/96] 2. Connect the other end of the first cable to the positive (+)
terminal of the booster battery.
*
[ER12100(ALL)02/96] 3. Connect one end of the second cable to the negative (s)
terminal of the booster battery — NOT to the discharged
battery.
*
[ER12200(ALL)01/96] 4. Connect the other end of the second cable to a good metallic
surface on the engine or frame of the disabled vehicle.
*
[ER12300(ALL)02/96]
RWARNING
Do not connect the end of the second cable to the
negative (s) terminal of the battery to be jumped. A
spark may cause an explosion of the gases that surround
the battery.
File:10cderz.ex
Update:Fri May 24 08:27:25 1996