Owner's Manual

Electronic Sound Systems
211
[AS02100(ALL)06/95]
■ Using the “TUNE” button to select the tune function
[AS02200(ALL)06/95]
You can change the frequency up or down one increment at
a time (FM changes in increments of 200 kHz; AM changes
in increments of 10 kHz) by pressing the “TUNE” button. To
change frequencies quickly, press and hold down either the
right or left side of the “TUNE” button.
[AS02300(ALL)05/94]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (See All About Radio Frequencies later in this
chapter.)
*
[AS02400(ALL)04/95]
■ Using the “SEEK” function
*
[AS02500(ALL)06/95]
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right (
a
) side of the “SEEK” button to select the next
listenable station up the frequency band. Press the left (
b
)
side of the button to select the next listenable station down
the frequency band. By holding the button down, listenable
stations can be passed over to reach the desired station.
[AS02600(ALL)06/95]
■ Using the “SCAN” button to scan radio stations
[AS02700(ALL)06/95]
Pressing the “SCAN” button once enters the scan mode by
stopping on each listenable station for a five-second
sampling. The radio band (AM/FM1/FM2) will blink to
indicate that the radio is scanning.
[AS02800(ALL)06/95]
To stop the scan mode on the presently sampled station
press the “SCAN” button again.
[AS03000(ALL)03/93]
Setting the station memory preset buttons
[AS03100(ALL)06/95]
Your radio is equipped with 6 station memory buttons. These
buttons can be used to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2). Follow the easy steps
below to set these buttons to the desired frequencies:
*
[AS03200(ALL)06/95] 1. Select a band, then select a frequency.
File:10vxasn.ex
Update:Mon Jun 3 14:57:29 1996