Owner's Manual

[RR08000(ALL)01/93]

Installing the Removable Bucket Seats

[RR08100(ALL)01/93]

To position the bucket seats back in their original positions:

[RR08200(ALL)06/95] 1. Make sure the area around the floor anchor positions is free

from obstruction.

[RR08300(ALL)01/93] 2. With the seatback folded down, two people should lift the

seat into the vehicle.

[RR08400(ALL)01/93] 3. Place the seat slightly behind the floor anchor positions and

catch the rear leg anchors into each anchor position.

[RR08500(ALL)01/93] 4. Press down on the front of the seat to secure the front legs

to the two floor latch locks. Place the seatback in the upright

position.

[RR08600(ALL)01/93] 5. Try to move the seat to be sure that it is securely fastened.

[RR08650(ALL)06/95] 6. Replace any floor mats that were removed.

[RR08700(ALL)01/93]

Labels have been provided on the side of the seats to remind

you of important safety precautions.

[RR09000(ALL)01/93]

RWARNING

Keep foreign objects out of the floor anchors. Objects in

the floor anchors could prevent front and rear seat legs

from engaging properly.

File:09vxrrn.ex

Update:Mon Jun 3 14:46:49 1996