Owner's Manual

184
[RR04500(ALL)01/93]
If you decide to move the three-passenger bench seat forward to
the second row position, passengers riding in the seat will use
the second row safety belts.
[RR04600(ALL)04/95]
Installing the Two-Passenger Bench Seat
[RR04700(ALL)01/93]
To replace the bench seat in its original position:
[RR04800(ALL)06/95] 1. Make sure the area around the floor anchor positions is free
from obstruction.
[RR04900(ALL)01/93] 2. With the seatback folded down, two people should lift the
seat into the vehicle.
[RR05000(ALL)01/93] 3. Place the seat slightly behind the floor anchor positions and
catch the rear leg anchors into each anchor position.
[RR05100(ALL)01/93] 4. Press down on the front of the seat to secure the front legs
to the two floor latch locks. Place the seatback in the upright
position.
[RR05200(ALL)01/93] 5. Try to move the seat to be sure that it is securely fastened.
[RR05300(ALL)01/93] 6. Always reattach the tongue into the auxiliary buckle
mounted to the side of the seat.
[RR05400(ALL)01/93]
Labels have been provided on the side of the seat to remind
you of important safety precautions.
[RR05700(ALL)01/93] 7. Replace any floor mats that were removed.
[RR05800(ALL)01/93]
RWARNING
Keep foreign objects out of the floor anchors. Objects in
the floor anchors could prevent front and rear seat legs
from engaging properly.
[RR05900(ALL)01/93]
RWARNING
Before sitting in the removable seats, make sure that the
seat legs are securely attached by the floor anchors.
File:09vxrrn.ex
Update:Mon Jun 3 14:46:49 1996