Owner's Manual

289
[SV30475(ALL)07/93]
one third page art:0070173-A
Brake fluid master cylinder reservoir
%
*
[SV30500(ALL)02/95]
If the fluid is low, carefully clean and remove
the filler cap from the reservoir. Fill the
reservoir to the MAX line with Ford High
Performance DOT 3 Brake Fluid C6AZ-19542-AA
or DOT 3 equivalent fluid meeting Ford
specification ESA-M6C25-A.
*
[SV30800(ALL)01/95]
RWARNING
If you use a brake fluid that is not DOT
3, you will cause permanent damage to
your brakes.
*
[SV30900(ALL)01/95]
Do not fill the reservoir above the MAX line.
[SV30950(ALL)06/93]
NOTE: Avoid spilling brake fluid on painted
surfaces.
*
[SV31000(ALL)01/95]
If you find that the fluid level is excessively low
— below the seam or ridge on the outside of the
plastic reservoir — have the brake system
inspected.
*
[SV31100(ALL)01/95]
RWARNING
Do not let the reservoir for the master
cylinder run dry. This may cause the
brakes to fail.
File:15ctsvr.ex
Update:Thu Sep 21 14:28:02 1995