Owner's Manual

286
%
*
[SV29340(ALL)02/93]
Checking the Automatic Transaxle Fluid
[SV29345(ALL)03/95]
It is preferable to check the transaxle fluid level
at normal operating temperature after
approximately 20 miles (32 km) of driving.
*
[SV29350(ALL)02/95]
With the vehicle on a level surface and the brake
pedal fully applied, start the engine and move
the gearshift selector through all of the gears.
Allow sufficient time for each position to engage.
Securely latch the gearshift selector in the P
(Park) position. Fully set the parking brake and
leave the engine running.
*
[SV29370(ALL)01/95]
Wipe off the dipstick cap and pull the dipstick
out. Wipe the indicator end clean. Put the
dipstick back into the filler tube and make sure
it is fully seated. Pull the dipstick out and read
the fluid level.
[SV29392(ALL)12/89]
When checking fluid at the normal operating
temperature, the fluid level should be within the
normal operating temperature marks on the
dipstick. When the vehicle has not been driven,
and outside temperatures are above 68˚F (20˚C),
the fluid levels should be between the room
temperature marks on the dipstick.
[SV29394(ALL)08/93]
one third page art:0070122-B
Automatic transaxle fluid dipstick
File:15ctsvr.ex
Update:Thu Sep 21 14:28:02 1995