Owner's Manual

223
[RE09850(ALL)03/95]
2. Insert the jack handle into the jack and turn
it clockwise until the tire just clears the
ground. Remove the wheel lug nuts.
*
[RE10390(ALL)08/95]
Your vehicle has metric (12 mm) wheel studs
and lug nuts. During wheel removal and
replacement, make certain that you use the same
lug nuts to reinstall the wheel or replace them
with nuts of the same metric size and threading.
*
[RE10400(ALL)08/95]
RWARNING
Installation of an English thread nut on a
metric stud (or vice-versa) will not
properly secure the wheel to the hub.
Damaged studs may result in wheel
separation and possible injury.
[RE12100(ALL)03/95]
3. Replace the flat tire with the spare tire.
(TEMP. USE ONLY label facing outward.)
*
[RE12200(ALL)03/95]
4. Reinstall the lug nuts, tightening until the
wheel is snug against the hub. The beveled
edges on the lug nuts face inward. Do not
fully tighten the lug nuts until you lower the
vehicle. If you do, you could force the
vehicle off the jack.
*
[RE12300(ALL)01/95]
5. Lower the vehicle by turning the jack handle
counterclockwise.
File:12ctrer.ex
Update:Thu Sep 21 14:23:27 1995