Owner's Manual

283
% [SV48900( BCGV)06/94]
To remove the high-mount brakelamp:
[SV49200( BC )01/89]
1. Slide the trim cover toward the front of the
vehicle to disengage the retaining clips.
[SV49500( BC )01/89]
2. Twist the socket counterclockwise and
remove from lamp.
[SV50015( BC )03/91]
3. Pull bulb out of socket.
[SV50100( BC )01/89]
4. Remove the retaining screw.
[SV50200( BC )01/89]
5. Lift the lamp above the carpet and slide
away from the rear window.
[SV50260( BC )05/94]
6. Replace the burned out bulbs.
*
[SV50300( BCGV)02/95]
To install the high-mount brakelamp:
[SV50400( BC )01/89]
1. Slide the lamp into slots, toward the rear
window.
[SV50700( BC )01/89]
2. Install the screw.
[SV51000( BC )01/89]
3. Push bulb into the socket.
[SV51300( BC )01/89]
4. Install the bulb and socket into the lamp and
twist socket clockwise until it locks.
[SV51500( BC )01/89]
5. Slide the trim cover toward rear of vehicle
to engage the retaining clips.
File:rcsvc.ex
Update:Mon Jun 12 16:45:15 1995