Owner's Manual

264
*
[SV32400( ALL)03/95]
If the fluid is low, carefully clean and remove
the cap from the reservoir. Fill the reservoir to
the MAX line with Ford High Performance
DOT 3 Brake Fluid C6AZ-19542-AA,
C6AZ-19542-BA, or equivalent DOT 3 fluid
meeting Ford specification ESA-M6C25-A.
*
[SV33100( ALL)01/95]
RWARNING
If you use a brake fluid that is not
DOT 3, you will cause permanent damage
to your brakes.
*
[SV33200( ALL)01/95]
Do not fill the reservoir above the MAX line.
[SV33500( BC )03/93]
one third page art:0010387-A
The brake system fluid reservoir
*
[SV33700( ALL)01/95]
If you find that the fluid level is excessively low
— below the seam or ridge on the outside of the
plastic reservoir — have the brake system
inspected.
*
[SV33750( ALL)01/95]
RWARNING
Do not let the reservoir for the master
cylinder run dry. This may cause the
brakes to fail.
File:rcsvc.ex
Update:Mon Jun 12 16:45:15 1995