Installation & Assembly

ManualsBrandsMercury Row Manuals3 Shelf BookcasesChapple 52.5'' H x 45'' W Cube Bookcase

Hardware:

Thank you for purchasing the BOOKCASE !

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or instructions until you have checked all the components and

hardware and the furniture is fully assembled.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to

tighten the

components from time to time, so please save the tools that have been provided.

6.Please keep all pieces out of reach of children.

Plat Joint

Screw

Wedge

Plat Mitres

Dowel Big

Cam Bolts

x24

x32

x20

x16

Cam Lock

Screw Small

Allen Key

Screw

Screwdriver

x1(not included)

BOOKCASE

Page 1 of 12

Summary of content (12 pages)

PAGE 1
BOOKCASE Thank you for purchasing the BOOKCASE ! Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2.Owing to the size and weight of the desk, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 60 minutes. 3.Please do not use any tools other than those provided or recommended in these instructions. 4.
PAGE 2
BOOKCASE Components: 1 9 5 9 6 4 8 5 5 4 7 9 5 9 2 3 3 3 3 1 Top Board x1 2 Bottom Board x1 3 Leg x4 4 Side Board x2 5 Centre Board x4 6 Fixed Shelf 1 x1 7 Fixed Shelf 2 x1 8 Back Board 1 x1 9 Back Board 2 x4 Page 2 of 12
PAGE 3
BOOKCASE STEP 1: 1 2 Ax10 Mx1 Hardware required. Screwdriver not included STEP 2: C A 4 D 9 8 Ax8 Cx8 Dx20 Mx1 D Hardware required.
PAGE 4
BOOKCASE STEP 3: A C 6 C 7 Ax4 Cx8 Mx1 Hardware required.
PAGE 5
BOOKCASE STEP 5: 5 5 B 6 Bx4 Mx1 Hardware required.
PAGE 6
BOOKCASE STEP 7: H 7 E Ex1 Hx4 Hardware required STEP 8: 4 4 B Bx8 Mx1 Hardware required.
PAGE 7
BOOKCASE STEP 9: A 5 B Ax2 Bx2 Mx1 Hardware required.
PAGE 8
BOOKCASE STEP 11: B H 2 E Bx4 Ex1 Hx2 Mx1 Hardware required. Screwdriver not included STEP 12: Attention : L(Plat Mitres) Assembly Position L F Fx16 Lx4 Mx1 Hardware required.
PAGE 9
BOOKCASE STEP 13: 3 3 3 3 STEP 14: 5 H E Ex1 Hx2 Hardware required Page 9 of 12
PAGE 10
BOOKCASE STEP 15: 9 9 STEP 16: 1 B Bx6 Mx1 Hardware required.
PAGE 11
BOOKCASE STEP 17: J K J K J Jx8 Kx8 J Hardware required F STEP 18: G Fx4 Gx2 Mx1 Hardware required.
PAGE 12
BOOKCASE STEP 19: ATTACHMENT OF FURNITURE : This furniture may pose a danger to your security if it's attachment on the wall has been done in an incorrect way. This attachment must be done by a person with great expertise who will make sure adequacy between the device of fixing and the wall. For your safety, it is imperative to fix your furniture to the wall. Assembly is completed.