Owner Manual
Step 4
C
A
å
Separate the EXTENSION SLIDES (BB) from the EXTENSION RAILS (AA) as shown in the enlared diaram below. Be
prepared, the parts are reasy.
å
Fasten the EXTENSION RAILS (AA) to the RIGHT END (A) and UPRIGHT (C). Use six BLACK 1/2" PAN HEAD
SCREWS (16).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlared diaram. Then, slide the inner
cartride of the EXTENSION RAIL out to fi nd the other two holes that line up with the holes in the END. Turn a SCREW
into those holes.
å
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
Pull up or down on the black lever and pull the SLIDE from the RAIL.
AA
BB
BLACK 1/2" PAN HEAD SCREW
(6 used in this step)
16
Open end
Open end
Rounded corner
Rounded corner
AA
AA
Pae 8