Assembly Instructions (Armless)
Carefully remove all of the components from the packaging and
set aside for assembly. Assemble on a soft surface to prevent
scratching the finish.
DO NOT use any sharp objects to open plastic wrapped components
as damage to product or components may result.
Step 3
Step 2
Assembly
Your recliner style may differ from images. Care for your furniture by
periodically tightening all bolts using the included hex key.
CAUTION: Tighten all components securely
before use. Failure to do so may result in
personal injury.
Your recliner comes packaged in one box.
Recliner Assembly Instructions
Parts List
A
1 x Seat
B
1 x
Back
B
A
“Please note the handle is used to release the foot rest.
Use your arms to recline all the way back. To close,
please use your legs to push the foot rest down”.
Step 1
C
2 x Right
Connectors
D
2 x Left
Connectors
E
8 x Bolts
Pre-Attached
F
1 x
Hex Key
G
8 x
Nuts
Pre-Attached
A
M6 x 24mm
M6 x 14mm
M6 x 80mm
1 x Wrench
Hardware List
Hardware List
H
Front
Replaceable Parts
*
*
*
*
*
*
*
Right
Left
2 x
F
E
D
H
G
Loosely attach all bolts and nuts to
the connector before fully tightening.
About your furniture piece:
Softening of foam is natural and will happen over time with use.
Fabric will fade or discolor in direct sunlight. Minimize exposure to
direct sunlight to extend the life of your furniture.
Wood grain, knots, streaks, and color variation occur naturally
in wood and are not considered defects.
.
.
.
2 x
F
E
C
H
G
Loosely attach all bolts and nuts to
the connector before fully tightening.