Assembly Instruction

ManualsBrandsMercury Row ManualsBar CartsZona 18'' Wide Bar Cart with Removable Serving Tray and Wine Bottle Storage

Table Of Contents

ASSEMBLY INSTRUCTION

Tray

Connecting

frame

Crossbar Side frame

Middle panel

Lower panel

1PC 2PCS 2PCS

1PC2PCS

1PC

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly,place

the contents on a carpeted or padded area to

protect them from damage.

Wire Non-Locking

caster

2PCS 2PCS

Lock caster

Handle

2PCS 2PCS

Screw 1/4"X1/2"

Allen wrench

12PCS 1PC 12PCS 6PCS

Screw

1/4"X1-3/8"

Wood screw

D E

H I

K L

M N

1PC

Spanner wrench

KITCHEN CART

Summary of content (5 pages)

PAGE 1
ASSEMBLY INSTRUCTION KITCHEN CART A B Tray Connecting frame 1PC F Lower panel Screw 1/4"X1/2" 12PCS Crossbar 2PCS G 1PC K C 2PCS H Wire Non-Locking caster 2PCS L Allen wrench D Screw 1/4"X1-3/8" 1PC 12PCS E Middle panel 2PCS I 2PCS M Side frame Lock caster 1PC J 2PCS N Wood screw 6PCS Handle 2PCS O Spanner wrench 1PC This page lists all the contents included in the box.
PAGE 2
*** Do not tighten screws & bolts until the entire unit is completely assembled. Attach Handle (J) to Tray (A) with Screw (M) and Secure using Allen wrench (L) as shown. 1 J A M M L M M J Attach Middle Panel (E) to Wire (G) using Wood screw (N) and a Phillips Head Screwdriver.
PAGE 3
Install Non-Locking caster (H) to Side frame (D) assemblies as shown. Then, install Locking caster (I) to Side frame (D) assemblies Secure both Caster (H / I) by tightening the CLOCKWISE using Spanner wrench (O). H D H I O I H O I D O D D 4 Install Crossbar (C) and Connecting frame (B) to Side fame (D) as shown. Carefully place Middle panel (E) and Lower panel (F) down into position on Side frame (D) as shown.
PAGE 4
5 Install Side frame (D) to Crossbar (C) and Connecting frame (B) as shown. D C E F B B 6 Attach Crossbar (C) and Side frame (D) to using Screws (K) and Allen wrench (L) as shown. Attach Middle panel (E) and Side frame (D) to using Screws (M) and Allen wrench (L) as shown. Attach Lower panel (F) and Side frame (D) using Screws (M) and Allen wrench (L) as shown. Attach side frame (D) and Connecting (B) using Screws (K) and Allen wrench (L) as shown.
PAGE 5
7 Place the Tray (A) into the Side frame (D) as shown. A D Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.