Assembly Instructions

Step 1
Step 2
Position the Chair on its back, as shown.
(Perferrably on a surface that won't scratch the upholstery.)
Open the inner box and take out the 4 wooden legs provided.
Install the first leg into the bottom of the chair by placing 1 plastic washer ring (improvees
tightness and security of leg) onto the threaded stem.
(The use of washer rings are OPTIONAL and is especially useful to help alleviate slight
wobbleness).
Insert the leg into the bolt point at the base of the chair.
Tighten by turning the leg clockwise.
Repeat the same steps to install the three remaining legs.
Page 3 of 5