Warnings: You must read this before you proceed.
Label Description QTY A Chair Backrest-A1 & Chair Base Body-A2 A1-1pc A2-1pc B Wooden leg 4pcs Description QTY Washer Rings 7pcs Label Picture Picture 1 Before Beginning Assembly: Page 2 of 5
Step 1 Position the Chair on its back, as shown. (Perferrably on a surface that won't scratch the upholstery.) Open the inner box and take out the 4 wooden legs provided. Step 2 Install the first leg into the bottom of the chair by placing 1 plastic washer ring (improvees tightness and security of leg) onto the threaded stem. (The use of washer rings are OPTIONAL and is especially useful to help alleviate slight wobbleness). Insert the leg into the bolt point at the base of the chair.
Step 3 Standing behind the chair, hold up the backrest. Tilt the chair backrest slightly forward, then allow the slots to meet and slide lock into the prefabricated gadget. Firmly and gently push the entire backrest until you the backrest is fully slotted and locked into position. Step 4 Upon completion of the above steps, smooth down the fabric fabric flap. Run your hand down both sides of the flap, from top to bottom, allowing the velcro tape to adhere the flap to the seat chair.
Page 5 of 5
User Instructions. Recliner Chair Please read the Instruction Manual below carefully before use. This is a Recliner Chair. At anytime in a reclined seat position or in the upright position. You may enjoy the rocking motion by using your body weight in a back-front rocking motion. Supervise children use of this Recliner. To get into a reclined posture - To Recline backrest Sit into the seat. Place your feet apart . Place your left and right arm onto the armrest. Synchronise a backward push with your arms.
