Daybed with Storage Twin Tan Linen Weight Limit: Bed：400 Lb / 181 Kg Drawer: 40 Lb / 18 Kg Thank you for purchasing DO NOT RETURN TO THE STORE ! Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Warranty Information We warrant this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
B A Parts For Daybed D E All in 1 big box! There are inner box(es) that include components required to complete this assembly. Back Rest Armrest Armrest Side Rail X1 X1 X1 X1 F Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts For Drawers C L M All in 1 big box! There are inner box(es) that include components required to complete this assembly. Front Panel Drawer Bottom Panel Drawer Back Panel X2 X2 X2 S N Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
2 1 3 Hardware Pack 5 4 3/16 X 3/8" X4 1/4" X 3/4" 1/4" X 3/4" X2 X 23 1/4" X 1 3/16" X8 1/4" X 1 9/16" X6 6 7 8 9 1/4'' X2 3/16 X 7/8" X 12 3/16 X 1" X 28 4mm X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Step 1 Z Screw Z x 4 to B and D. Screw w to B and D, leave half of the thread exposed. D Z Z Do not completely tighten the BOLTS, leave half of the thread exposed. D B Z Z 3 3 To avoid fraying the fabric during assembly, please lay the part B & D on a piece of cardboard.
Step 2 B Attach H x 2 to B and D with v.
Step 3 Attach V and W to A with v. V A A W V A W Small holes on slots of V and W should be facing upward.
Step 4 D A Hang sub-assembly from Step 3 on B and D as illustrated, don't completely tighten the bolts until STEP 7 is complete.
Step 5 D Attach F to B and D with v.
Step 6 I G I Attach I to G with v.
Step 7 D Attach G to B and D with v. Then properly tighten all the BOLTS.
Step 8 A Attach E to A with x.
O X X Y O O E 9.2 9.1 F O Step 9 9.1 Insert O into X; 9.2 Press X into E, repeat the same procedure for the opposite side with another O & X on G. 9.3 Insert ends of both slats O into Y, then press Y into F as illustrated. 9.3 SLAT WARNING F X Y E X G Correct: Slat curve should be facing upwards. O Incorrect: Slat curve facing downwards.
Step 10 Attach M to S and N withz. Don't completely tighten the bolts until STEP 12 is complete. For better performance, please orient the plastic sheet towards inside of the drawer.
5 Step 11 6 7 Q Q L 11.2 Attach Q X 4 and L to S and N with {. 11.3 Attach L to M with z. L L S 11.1 M 11.3 11.2 Q 11.1 Attach Q to L with y. Ensure that the threaded hole on L is properly oriented as shown.
Step 12 Attach sub-assembly L/S/N/M from previous step to C with {, then properly tighten all the bolts.
Step 13 Attach u and C 8 | to C.
Step 14 Align Drawers with the bed frame and push them into the bed. Lock drawers by slightly lifting drawer and inserting the Pin into the Slot.
Helpful Hints Weight Limit: Bed: 400 Lb / 181 Kg Drawer: 40 Lb / 18 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old.
NO LO REGRESE A LA TIENDA ! Diván con almacenamiento Individual Lino Ocre Fecha de compra Número de lote Gracias por su compra! Contáctenos! Para solicitar ayuda con el ensamblaje, identificación de partes, información del producto o simplemente ordenar otras partes, dirijase a ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA. Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia.
Partes Todo se incluye en 1 caja grande! Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para completar este ensamblaje. Antes de tirar este paquete, por favor utilice la Casilla de Verificación para identificar sus partes y garantizar de que cuenta con todas las piezas necesarias para el ensamblaje.
Límites de peso: 400 Lb / 181 Kg Cajón: 40 Lb / 18 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
NE RETOURNEZ PAS AU MAGASIN ! Lit de jour avec rangement Lit une place Lin Ocre Date d'achat Numero de lot Merci d'avoir acheté un produit ! Contact Besoin d'aide pour assembler, identifier des pièces, s'informer sur le produit, ou pour commander des pièces, contactez-nous CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE.
Pièces Tout dans 1 grosse boîte! Il y a des boîtes intérieures qui contiennent les composants pour completer l'assemblage. Avant de jeter l'emballage, s'il vous plaît utiliser les cases à cocher pour identifier les pièces et assurez-vous que vous avez toutes les pièces nécessaires pour l'assemblage.
Limite de Poids: 400 Lb / 181 Kg Tiroir: 40 Lb / 18 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces ont été pré-assemblées pour ce produit. Ils sont illustrés sur cette page et disponibles pour le remplacement.
