Assembly Instructions

Step 4.1: Place the assembled frame face skywards onto a clean, soft surface to avoid any
scratches or damages to the product. Then attach the Support bar (D) into assembled frame
as shown in picture.
Step 4.2: Affix the Support bar (D) with the Horizontal support bar (B) by using Short screws
(
k
) and Allen key (
l
).
Step 4.3: Affix the Support bar (D) with the Leg (C) by using Short screws (
k
) and Allen key
(
l
).
Step 4
4.2
4.3
Page 5 of 7
(
l
).
CAUTION: DO NOT FULLY TIGHTEN THE SCREWS.
Step 5
Repeat same process as Step 4 to attach the Support bar (D) with assembled frame as
shown in picture.
CAUTION: DO NOT FULLY TIGHTEN THE SCREWS.
Page 5 of 7