Owner Manual

CAUTION IMPORTANT
SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other as a
safety feature to reduce the risk of electric shock. This plug will t in a polarized
outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it
still does not t, contact a qualied electrician. Never use with an extension cord
unless the plug can be fully inserted. Do not alter the plug.
CLEANING:
Before cleaning your lamp, turn off the switch or power source. Wipe the lamp
with a soft, clamp cloth.
ATTENTION:
1. Turn off/unplug and allow to cool before changing the bulb. Never touch
the bulb when the lamp is switched on.
2. If the supply cord is damaged, it must be replaced by the manufacturer
or a similarly qualied person in order to avoid a hazard.
ENGLISH
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:—Reorient or relocate the receiving
antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into
an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an
experienced radio/TV technician for help.