Installation & Assembly

Part List

1 x Left Arm

1 x Front Rail

1 x Hex Key (L)

M5 x 65mm

8 x Bolts (S)

M8 x 20mm

2 x Bolts (L)

M6 x 50mm

10 x Lock Washers

8 x Screws

M4 x 32mm

1 x Hex Key (S)

M4 x 65mm

Hardware List

1 x Right Arm

4 x Legs

1 x Back Panel

2 x Slats

8 x Bolts (M)

M6 x 25mm

2 x Flat Washers

1 x Phillips Screwdriver

(Not Included)

Daybed Assembly Instructions

Your daybed comes packaged in one box.

DO NOT use any sharp objects to open plastic wrapped components

as damage to product or components may result.

Carefully remove all of the components from the packaging and

set aside for assembly. Assemble on a soft surface to prevent

scratching the finish.

Replaceable Parts

PAGE 1
Daybed Assembly Instructions Your daybed comes packaged in one box. DO NOT use any sharp objects to open plastic wrapped components as damage to product or components may result. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching the finish.
PAGE 2
Assembly Step 1 Step 2 C B A A B 4x 8x E D M H J N G Step 3 Step 4 I 2x 8x O L K J I M Your daybed may differ from images. Care for your furniture by periodically tightening all legs and periodically tightening all bolts using the included hex key. About your furniture piece: • Softening of foam is natural and will happen over time with use. • Fabric will fade or discolor in direct sunlight. Minimize exposure to direct sunlight to extend the life of your furniture.