Owner Manual

ManualsBrandsMercury Row ManualsBlack Dressers & ChestsKai 4 Drawer 25'' W Chest

A B C D

E F G H

I J K L

1 2 3 5

4-DRAWER DRESSER

Top Panel - 1 pc Left Side Panel - 1 pc Right Side Panel - 1 pc Back Panel - 1 pc

Bottom Panel - 1 pc Drawer Front - 4 pcs Left Drawer Side - 4 pcs Right Drawer Side - 4 pcs

Drawer Bottom Panel - 4 pcs Drawer Back - 4 pcs Divider Panel - 1 pc Legs - 4 pcs

25mm Allen

Bolt - 28 pcs

Handle - 4 pcs Allen Key - 1 pc

12mm Allen

Bolt - 16 pcs

19mm Handle

Screw - 8 pcs

TOOLS NEEDED: Phillips Screwdriver

Summary of content (5 pages)

PAGE 1
4-DRAWER DRESSER 1 A Top Panel - 1 pc B Left Side Panel - 1 pc C Right Side Panel - 1 pc D Back Panel - 1 pc E Bottom Panel - 1 pc F Drawer Front - 4 pcs G Left Drawer Side - 4 pcs H Right Drawer Side - 4 pcs I Drawer Bottom Panel - 4 pcs J Drawer Back - 4 pcs K Divider Panel - 1 pc L Legs - 4 pcs 25mm Allen Bolt - 28 pcs 2 Handle - 4 pcs 3 Allen Key - 1 pc TOOLS NEEDED: Phillips Screwdriver 4 19mm Handle Screw - 8 pcs 5 12mm Allen Bolt - 16 pcs
PAGE 2
Step 1: Secure divider panel (K) to the side panels (B,C) by placing the plastic pieces into the slots and sliding the side panels toward the front. Step 2: Attach legs (L) to the bottom panel (E) using Allen bolts (1) and the Allen Key (3). C K E Note: Make sure the mounting blocks are facing upward. 5 B 3 L Step 3: Attach the left side panel (B) and right side panel (C) by placing the plastic pieces into the slots and sliding the bottom panel (E) toward the back.
PAGE 3
Step 5: Secure the back panel (D) to the mounting blocks using Allen bolts (1) and the Allen key (3). Step 6: Attach the left drawer side (G) and right drawer side (H) to the drawer front (F) by placing the plastic pieces into the slots and sliding the drawer front (F) down. A 1 H Note: Make sure the metal tracks are facing outward and the bottom panel groove is toward the bottom. C D F 3 G Step 7: Slide the drawer bottom panel (I) into place.
PAGE 4
Step 9: Attach a handle (2) to the drawer front (F) using a screw (4) and Phillips screwdriver. Repeat for each drawer 4 2 Step 10: Place drawers into the dresser frame on the metal tracks and slowly work the drawers into place until fully closed. To remove the drawers, use the lever release. Pull the drawer out as far as possible, and you'll see a plastic lever on each side. Pull one lever up and push the other down to remove the drawer.
PAGE 5
LIMITED 1-YEAR WARRANTY WHAT IS COVERED WHAT WE WILL DO This warranty covers any defects in materials or workmanship, with the exceptions stated below. At our sole discretion we will repair, replace, or refund any product that proves to be defective in materials or workmanship. HOW LONG COVERAGE LASTS This warranty runs for one (1) year from the date of purchase.