Owner Manual

å
Fasten the CABINET RIGHT (5) to the LEFT UPRIGHT LEG (B). Use three BLACK 1/2" FLAT HEAD SCREWS (19).
å
Fasten the CABINET LEFT (6) to the LEFT END LEG (A). Use three BLACK 1/2" FLAT HEAD SCREWS (19).
å
Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diaram below. Be
prepared, the parts are reasy.
å
Fasten the EXTENSION RAILS (1) to the LEFT END LEG (A) and LEFT UPRIGHT LEG (B). Use six BLACK 1/2" FLAT
HEAD SCREWS (19).
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlared diaram. Then, slide the inner
cartride of the EXTENSION RAIL in to fi nd the other holes that line up with the holes in the LEFT LEGS. Turn a
SCREW into those holes.
å
NOTE: The EXTENSION SLIDES will be used later for the LARGE DRAWER.
Step 2
A
B
Open end
Open end
Roller end
Roller end
Push the black lever in and pull the SLIDE from the RAIL.
BLACK 1/2" FLAT HEAD SCREW
(12 used in this step)
19
1
1
1
5
6
2
Pae 7