(Gray Velvet) (Blue Velvet) Upholstered Bed King Weight Limit: Bed: 500 Lb / 227 Kg THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Warranty Information Read Before Beginning Assembly We warrant this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase. This is solely limited to the repair or replacement of defective parts and assembly labor is not included. ● Call our toll free number if you need assistance.
Parts A This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Headboard X1 Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Parts C B F E This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Footboard Side Panel Side Rail Center Rail X1 X2 X2 X2 K Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
3 2 1 4 5 Hardware Pack 1/4" X 3/4" X 52 1/4" X 1 3/16" X4 1/4" X 1 9/16" X 14 5/16" X 2 1/4" 4mm X4 X1 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions. The screw(s), bolt(s) to be used at each step are shown in actual size in the lower right corner of the page.
Attach E to C with w. Repeat the same step for remaining parts E/C. E C The slat holes on part E should be facing upward. X2 3 These two holes should be located at the bottom side.
T Attach T and S to C with u. Repeat the same step for remaining parts T/S/C.
A 2 Screw v into A and u into B, leave half of the thread exposed. 1 B Do not completely tighten the bolts, leave half of thread exposed.
A C 2 A T Hang C x 2 on A and B as illustrated, don't completely tighten the bolts until STEP 9 is complete.
Attach N to Z with x. Repeat this step for all remaining legs Z and N.
A C Attach N x 4 to A, B and C x 2 with u.
Attach L x 2 to F with u. Repeat the same procedure for remaining parts L x 2 and F.
Attach F x 2 to A and B with u .
F E Attach K to E X 2 and F X 2 with u Then properly tighten all the bolts. .
X X 10.1 Insert P1 into X; 10.2 Press X into E, repeat the same procedure for the opposite side of the bed with a new P1 and X into E. Follow the same procedures going backwards for every row of slats. P1 P1 E 10.1 10.2 SLAT WARNING X P1 E Correct: Slat curve should be facing upwards. Incorrect: Slat curve facing downwards.
P1 Y P1 Y F Y P1 P1 F Y 11.1 Insert Y x 2 onto the free end of both P1 assembled in previous step, Take a new P1 and insert each end into the other free end of Y x 2; 11.2 Press Y x 2 SIMULTANEOUSLY into F x 2 as illustrated. Follow the same procedure going backwards for every row of slats. F 11.1 P1 11.2 SLAT WARNING Correct: Slat curve should be facing upwards. Y Incorrect: Slat curve facing downwards.
Weight Limit: 500 Lb / 227 Kg Helpful Hints ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement. WARNINGS: For safety reasons and to prevent injuries: ● This bed is not intended for use by children under 4 years old. ● Prohibit jumping and horseplay on this bed.
(Terciopelogris) (Terciopelo azul) Cama tapizada King ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD. POR FAVOR LEA Y GUARDE PARA SU REFERENCIA FUTURA. Gracias por su compra! Información sobre la garantía Garantiza que este producto está libre de defectos de fábrica en la mano de obra y el material y se compromete a solucionar dichos defectos. Este producto tiene una garantía limitada de 1 año a partir de la fecha de compra original.
Paquete de componentes Nota: Por favor no apriete completamente las piezas hasta que el ensamblaje sea completado, a menos de que se indique específicamente en las instruccíones de paso a paso. Los tornillo(s), perno(s) que se utilizarán en cada paso se muestran en tamaño real en la esquina inferior derecha de cada página. Instrucciones Paso 1 Una E con C con w. Repita el paso las otras partes E/C. Paso 2 Una T&S con C con u. Repita el paso las otras partes T/S/C.
Límites de peso: 500 Lb / 227 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles se pueden desmontar y volver a ensamblar en caso de mudanza. ● Algunas partes han sido pre-ensambladas en este producto. Se encuentran ilustradas en esta página y disponibles para reemplazo.
(Velours gris) (Velours bleu) Lit rembourré Très grand lit deux places CE FEUILLET CONTIENT DES INFORMATIONS DE SÉCURITÉ IMPORTANTES. S'IL VOUS PLAÎT LIRE ET CONSERVER POUR RÉFÉRENCE ULTÉRIEURE. Merci d'avoir acheté un produit! Avant de commencer l'assemblage Informations sur la garantie Garantit que ce produit est exempt de tout vice de matériaux et de fabrication et s'engage à remédier à un tel défaut. Cette garantie est d'une durée d'un àn compter de la date d'achat originale.
Quincaillerie Remarque: Ne serrez pas complètement les boulons jusqu'à ce que l'ensemble soit achevé, sauf indication contraire dans les intructions étape par étape. les vis & les boulons utilisés durant chaque étape sont présentés en taille réelle dans le coin inférieur droit de la page. Instructions Étape 1 Attacher E à C avec u. Répétez la même étape pour les autres C/E. Étape 2 Attacher T&S à C avec u. Répétez la même étape pour les autres T/S/C.
Limite de Poids: 500 Lb / 227 Kg Conseils utiles ● Déplacez votre nouveau mobilier avec soin, nous recommandons deux personnes pour soulever et transporter le mobilier vers son nouvel emplacement. ● Votre mobilier peut être démonté et reassemblé pour faciliter les déménagements. ● Certaines pièces (illustration disponible dans la section en anglais), sont pré -assemblées et disponibles au besoin pour un remplacement.
