Assembly Instruction

3
* - The two plastic washers are for the purpose of protecting mirror surface. Please place one of the washers
inside of the drawer and place the other one between front of the drawer and drawer knob.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or
damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
3
Using bolts (F) and allen wrench (G) again, attach the assembled metal base to
mirrored top with drawer (D) as shown.
Tighten all bolts and carefully turn the assembled unit upright.
4
Remove drawer knob w/ plastic washers (E) from inside of the drawer and reattach on drawer front
as shown. The mirrored end table assembly is now complete.
Remove drawer knob w/ washers (H) from inside of the drawer and reattach on drawer front as
shown. The desk assembly is now complete.