Assembly Instruction

ASSEMBLY INSTRUCTION

Side Panel

Stretcher

Mirrored Top

with Drawer

1pc

2pcs

1pc

Knob

Bolt

Allen Wrench

1/4”x1/2”

1/4”

1pc

14pcs

1pc

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

** Pre-attached to the inside

of drawer. **

MIRROR END TABLE WITH DRAWER A

Top

Frame

PAGE 1
ASSEMBLY INSTRUCTION MIRROR END TABLE WITH DRAWER Frame B A C Side Panel Top D Stretcher Mirrored Top with Drawer 1pc E 2pcs F Knob ** Pre-attached to the inside 2pcs G Bolt 1/4”x1/2” 1pc Allen Wrench 1/4” of drawer. ** 1pc 14pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
*** Do not tighten screws & bolts until the entire unit is completely assembled. 1 2 Attach side panels (B) to top frame (A) using bolts (F) and allen wrench (G) as shown. Then, attach stretchers (C) to side panels (B) using bolts (F) and allen wrench (G) as shown.
PAGE 3
Using bolts (F) and allen wrench (G) again, attach the assembled metal base to mirrored top with drawer (D) as shown. Tighten all bolts and carefully turn the assembled unit upright. 4 * Remove drawer knob w/ plastic washers (E) from inside of the drawer and reattach on drawer front as shown. The mirrored end table assembly is now complete. - The two plastic washers are for the purpose of protecting mirror surface.